GASKET SET TOP NAMURA HUSQVARNA CR125 WR125 97-14 WRE125 98-10 SM125 SMS125 98-14
Description
Quality materials mean increased longevity and continued performance. A critical aspect of any rebuild, gaskets are often given little thought. However, the right materials can make all the difference.
We do all of the thinking, so you don't have to. Our gaskets are manufactured from materials specifically chosen for each individual application. From top-end sets to complete kits for a full teardown, you can be sure that Namura gaskets are up to the task at hand.
Namura gaskets are manufactured to OE-specs, which means no trimming or fitment issues. Our materials are explicitly selected for their temperature, oil, fuel, and coolant-resistant qualities as well as tested using ASTM standards. Each design is evaluated against rigid quality-control standards to ensure each set meets or exceeds OE performance. Clutch gaskets are available for certain applications.
AF Gasket Material
Composed of non-asbestos Nitrile Butadiene bonded Cellulose fiber materials; they are commonly used in clutch cover, oil pump, and coolant applications. Components maintain their tensile strength and torque retention in operating conditions of over 300°F.
Steel & MLS (Multi-Layer Steel) Gaskets
No other gasket is more crucial than your head gasket. The seal between your cylinder and cylinder head is exposed to more heat and extreme pressures than anywhere else in your engine. In order to match these extreme conditions we offer one of the most advanced head gaskets on the market. Constructed from multiple layers of stainless steel to resist corrosion and erosive chemicals commonly found in your engine, then using an on-off pattern, our MLS gaskets are coated/embossed with a Fluoroelastomer based rubber to tightly seal the metallic mating surfaces. By doing this they can withstand the sheering forces created by the two surfaces (cylinder head and cylinder). This coating also enhances the bond between the gasket material and the imperfect surfaces commonly found when rebuilding your engine.
Seals & O-rings
NBR, Fluoroviton, and Silicone are selected for each application based upon the following characteristics: Temperature Resistance, Abrasion Resistance, Chemical Resistance, and their Aniline Point. A Teflon coating is applied on certain applications to prolong performance life.
Gasket Set Top Namura Husqvarna CR125 WR125 97-14 WRE125 98-10 SM125 SMS125 98-14
- HUSQVARNA CR125 1997
- HUSQVARNA CR125 1998
- HUSQVARNA CR125 1999
- HUSQVARNA CR125 2000
- HUSQVARNA CR125 2001
- HUSQVARNA CR125 2002
- HUSQVARNA CR125 2003
- HUSQVARNA CR125 2004
- HUSQVARNA CR125 2005
- HUSQVARNA CR125 2006
- HUSQVARNA CR125 2007
- HUSQVARNA CR125 2008
- HUSQVARNA CR125 2009
- HUSQVARNA CR125 2010
- HUSQVARNA CR125 2011
- HUSQVARNA CR125 2012
- HUSQVARNA CR125 2013
- HUSQVARNA CR125 2014
- HUSQVARNA SM125 1998
- HUSQVARNA SM125 1999
- HUSQVARNA SM125 2000
- HUSQVARNA SM125 2001
- HUSQVARNA SM125 2002
- HUSQVARNA SM125 2003
- HUSQVARNA SM125 2004
- HUSQVARNA SM125 2005
- HUSQVARNA SM125 2006
- HUSQVARNA SM125 2007
- HUSQVARNA SM125 2008
- HUSQVARNA SM125 2009
- HUSQVARNA SM125 2010
- HUSQVARNA SM125 2011
- HUSQVARNA SM125 2012
- HUSQVARNA SM125 2013
- HUSQVARNA SM125 2014
- HUSQVARNA SMS125 1998
- HUSQVARNA SMS125 1999
- HUSQVARNA SMS125 2000
- HUSQVARNA SMS125 2001
- HUSQVARNA SMS125 2002
- HUSQVARNA SMS125 2003
- HUSQVARNA SMS125 2004
- HUSQVARNA SMS125 2005
- HUSQVARNA SMS125 2006
- HUSQVARNA SMS125 2007
- HUSQVARNA SMS125 2008
- HUSQVARNA SMS125 2009
- HUSQVARNA SMS125 2010
- HUSQVARNA SMS125 2011
- HUSQVARNA SMS125 2012
- HUSQVARNA SMS125 2013
- HUSQVARNA SMS125 2014
- HUSQVARNA WR125 1997
- HUSQVARNA WR125 1998
- HUSQVARNA WR125 1999
- HUSQVARNA WR125 2000
- HUSQVARNA WR125 2001
- HUSQVARNA WR125 2002
- HUSQVARNA WR125 2003
- HUSQVARNA WR125 2004
- HUSQVARNA WR125 2005
- HUSQVARNA WR125 2006
- HUSQVARNA WR125 2007
- HUSQVARNA WR125 2008
- HUSQVARNA WR125 2009
- HUSQVARNA WR125 2010
- HUSQVARNA WR125 2011
- HUSQVARNA WR125 2012
- HUSQVARNA WR125 2013
- HUSQVARNA WR125 2014