*GASKET SET TOP NAMURA KTM450EXCF 09-11 450XCW 08-16 500EXCF 12-13 530EXCR 08-11
Description
Quality materials mean increased longevity and continued performance. A critical aspect of any rebuild, gaskets are often given little thought. However, the right materials can make all the difference.
We do all of the thinking, so you don't have to. Our gaskets are manufactured from materials specifically chosen for each individual application. From top-end sets to complete kits for a full teardown, you can be sure that Namura gaskets are up to the task at hand.
Namura gaskets are manufactured to OE-specs, which means no trimming or fitment issues. Our materials are explicitly selected for their temperature, oil, fuel, and coolant-resistant qualities as well as tested using ASTM standards. Each design is evaluated against rigid quality-control standards to ensure each set meets or exceeds OE performance. Clutch gaskets are available for certain applications.
AF Gasket Material
Composed of non-asbestos Nitrile Butadiene bonded Cellulose fiber materials; they are commonly used in clutch cover, oil pump, and coolant applications. Components maintain their tensile strength and torque retention in operating conditions of over 300°F.
Steel & MLS (Multi-Layer Steel) Gaskets
No other gasket is more crucial than your head gasket. The seal between your cylinder and cylinder head is exposed to more heat and extreme pressures than anywhere else in your engine. In order to match these extreme conditions we offer one of the most advanced head gaskets on the market. Constructed from multiple layers of stainless steel to resist corrosion and erosive chemicals commonly found in your engine, then using an on-off pattern, our MLS gaskets are coated/embossed with a Fluoroelastomer based rubber to tightly seal the metallic mating surfaces. By doing this they can withstand the sheering forces created by the two surfaces (cylinder head and cylinder). This coating also enhances the bond between the gasket material and the imperfect surfaces commonly found when rebuilding your engine.
Seals & O-rings
NBR, Fluoroviton, and Silicone are selected for each application based upon the following characteristics: Temperature Resistance, Abrasion Resistance, Chemical Resistance, and their Aniline Point. A Teflon coating is applied on certain applications to prolong performance life.
Gasket Set Top Namura KTM450EXCF 09-11 450XCW 08-16 500EXCF 12-13 530EXCR 08-11
- HUSABERG FE390 2010
- HUSABERG FE390 2011
- HUSABERG FE450 2009
- HUSABERG FE450 2010
- HUSABERG FE450 2011
- HUSABERG FE450 2012
- HUSABERG FE501 1990
- HUSABERG FE501 1991
- HUSABERG FE501 1992
- HUSABERG FE501 1993
- HUSABERG FE501 1994
- HUSABERG FE501 1995
- HUSABERG FE501 1996
- HUSABERG FE501 1997
- HUSABERG FE501 1998
- HUSABERG FE501 1999
- HUSABERG FE570 2010
- KTM 250 EXC-F 2012
- KTM 250 EXC-F 2013
- KTM 350 EXC-F 2012
- KTM 350 EXC-F 2013
- KTM 450 EXC-F 2009
- KTM 450 EXC-F 2010
- KTM 450 EXC-F 2011
- KTM 450 EXC-F 2012
- KTM 450 EXC-F 2013
- KTM 450 XCF-W 2008
- KTM 450 XCF-W 2009
- KTM 450 XCF-W 2010
- KTM 450 XCF-W 2011
- KTM 450 XCF-W 2012
- KTM 450 XCF-W 2013
- KTM 450 XCF-W 2014
- KTM 450 XCF-W 2015
- KTM 450 XCF-W 2016
- KTM 500 EXC-F 2012
- KTM 500 EXC-F 2013
- KTM 520 EXC-F 2012
- KTM 520 EXC-F 2013
- KTM 525 EXC-F 2012
- KTM 525 EXC-F 2013
- KTM 530 EXC-F 2008
- KTM 530 EXC-F 2009
- KTM 530 EXC-F 2010
- KTM 530 EXC-F 2011
- KTM 530 XCF-W 2009
- KTM 530 XCF-W 2010
- KTM 530 XCF-W 2011
You may also like
-
WOSSNER8894DB$199.00 inc GSTStock Level:Special Order Only
-
SW MOTECHFRS.01.112.10303$269.00 inc GST
-
-
