GASKET SET TOP NAMURA HUSABERG TE300 11-14 HUSQVARNA TE300 14-16 KTM 300EXC 300XC 300XCW 08-16
Description
Quality materials mean increased longevity and continued performance. A critical aspect of any rebuild, gaskets are often given little thought. However, the right materials can make all the difference.
We do all of the thinking, so you don't have to. Our gaskets are manufactured from materials specifically chosen for each individual application. From top-end sets to complete kits for a full teardown, you can be sure that Namura gaskets are up to the task at hand.
Namura gaskets are manufactured to OE-specs, which means no trimming or fitment issues. Our materials are explicitly selected for their temperature, oil, fuel, and coolant-resistant qualities as well as tested using ASTM standards. Each design is evaluated against rigid quality-control standards to ensure each set meets or exceeds OE performance. Clutch gaskets are available for certain applications.
AF Gasket Material
Composed of non-asbestos Nitrile Butadiene bonded Cellulose fiber materials; they are commonly used in clutch cover, oil pump, and coolant applications. Components maintain their tensile strength and torque retention in operating conditions of over 300°F.
Steel & MLS (Multi-Layer Steel) Gaskets
No other gasket is more crucial than your head gasket. The seal between your cylinder and cylinder head is exposed to more heat and extreme pressures than anywhere else in your engine. In order to match these extreme conditions we offer one of the most advanced head gaskets on the market. Constructed from multiple layers of stainless steel to resist corrosion and erosive chemicals commonly found in your engine, then using an on-off pattern, our MLS gaskets are coated/embossed with a Fluoroelastomer based rubber to tightly seal the metallic mating surfaces. By doing this they can withstand the sheering forces created by the two surfaces (cylinder head and cylinder). This coating also enhances the bond between the gasket material and the imperfect surfaces commonly found when rebuilding your engine.
Seals & O-rings
NBR, Fluoroviton, and Silicone are selected for each application based upon the following characteristics: Temperature Resistance, Abrasion Resistance, Chemical Resistance, and their Aniline Point. A Teflon coating is applied on certain applications to prolong performance life.
Gasket Set Top Namura Husaberg TE300 11-14 Husqvarna TE300 14-16 KTM 300EXC 300XC 300XCW 08-16
- HUSABERG TE300 2011
- HUSABERG TE300 2012
- HUSABERG TE300 2013
- HUSABERG TE300 2014
- HUSQVARNA FC350 1990
- HUSQVARNA FC350 1991
- HUSQVARNA FC350 1992
- HUSQVARNA FC350 1993
- HUSQVARNA FC350 1994
- HUSQVARNA FC350 1995
- HUSQVARNA FC350 1996
- HUSQVARNA FC350 1997
- HUSQVARNA FC350 1998
- HUSQVARNA TE300 2014
- HUSQVARNA TE300 2015
- HUSQVARNA TE300 2016
- KTM 300 EXC 2006
- KTM 300 EXC 2007
- KTM 300 EXC 2008
- KTM 300 EXC 2009
- KTM 300 EXC 2010
- KTM 300 EXC 2011
- KTM 300 EXC 2012
- KTM 300 EXC 2013
- KTM 300 EXC 2014
- KTM 300 EXC 2015
- KTM 300 EXC 2016
- KTM 300 XC 2008
- KTM 300 XC 2009
- KTM 300 XC 2010
- KTM 300 XC 2011
- KTM 300 XC 2012
- KTM 300 XC 2013
- KTM 300 XC 2014
- KTM 300 XC 2015
- KTM 300 XC 2016
- KTM 300 XC-W 2008
- KTM 300 XC-W 2009
- KTM 300 XC-W 2010
- KTM 300 XC-W 2011
- KTM 300 XC-W 2012
- KTM 300 XC-W 2013
- KTM 300 XC-W 2014
- KTM 300 XC-W 2015
- KTM 300 XC-W 2016
You may also like
-
-
NAMURANA10003CG$18.40 inc GSTStock Level:Special Order Only
-
NAMURANX40003F$63.95 inc GSTStock Level:Special Order Only
-
WOSSNER8125D100$249.95 inc GSTStock Level:Special Order Only
